Search results for "Polarized light"
showing 10 items of 23 documents
System for control of polarization state of light and generation of light with continuously rotating linear polarization
2019
We present a technique for generating light in an arbitrary polarization state. The technique is based on interference of two orthogonally polarized light beams, whose amplitudes and phases are controlled with a Mach-Zehnder inteferometer with acousto-optic modulators (AOMs) placed in each arm. We demonstrate that via control over amplitudes, phases, and frequencies of acoustic waves driving the AOMs, any polarization state can be synthesized. In particular, we demonstrate generation of linearly polarized light, whose polarization plane continuously rotates at a rate from 1 kHz to 1 MHz. Such light finds applications in science (e.g., investigations of Bloch-Siegert effect) and technology (…
Comparative measurement of collagen bundle orientation by Fourier analysis and semiquantitative evaluation: reliability and agreement in Masson's tri…
2017
Summary Measurement of collagen bundle orientation in histopathological samples is a widely used and useful technique in many research and clinical scenarios. Fourier analysis is the preferred method for performing this measurement, but the most appropriate staining and microscopy technique remains unclear. Some authors advocate the use of Haematoxylin-Eosin (H&E) and confocal microscopy, but there are no studies comparing this technique with other classical collagen stainings. In our study, 46 human skin samples were collected, processed for histological analysis and stained with Masson's trichrome, Picrosirius red and H&E. Five microphotographs of the reticular dermis were taken with a 20…
Transdermal nortriptyline hydrocloride patch formulated within a chitosan matrix intended to be used for smoking cessation.
2010
The aim of this study was to prepare and characterize both physically and biopharmaceutically, a nortriptyline hydrochloride (NTP-HCl) patch formulated in chitosan.16 g of each chitosan patch formulation (I, II and III, see Table 1 ) was poured onto rectangular glass plates (64 cm²) at a height of 1 mm and dried for 24 h at room temperature. In order to characterize the chitosan patches, polarized microscopy, in vitro skin permeation studies by passive diffusion and iontophoresis and rheological and bioadhesion studies were performed.Polarized microscopy revealed the absence of aggregates and crystal forms of NTP-HCl in all transdermal patches after 30 days of storage. The rheological behav…
Sources of geomaterials in the Sicani Mountains during the Early Middle Ages: A case study of Contrada Castro, central western Sicily
2022
From 2017, an unknown rural settlement in Contrada Castro at Corleone (Palermo Province, western Sicily) was investigated as part of the `Harvesting Memories Project¿. The stratigraphic sequence, supported by radiocarbon dating, has demonstrated a reoccupation of a pre-Roman site during the transition between the Byzantine and Islamic periods. In particular, the main occupation occurred in the late 8th¿9th century when pottery kilns and a probable warehouse were constructed. During the 10th¿11th century, a new structure with different orientations replaced the previous buildings that had already collapsed. Specifically focusing on a perspective of the household production and its relationsh…
Geomaterials in green building practices: comparative characterization of commercially available clay-based plasters
2013
Three pre-mixed powdered clay-based (earthen) plasters produced in Europe and specifically designed for wall undercoating were analyzed in this paper. These materials are commercially available and successfully employed in green building practices all over the world. Their compositional and textural characteristics, as well as plastic behaviour were investigated through a multi-analytical approach: X-ray powder diffraction (XRPD), polarized light microscopy (PLM), X-ray fluorescence spectrometry (XRFS), scanning electron microscopy equipped with an energy dispersive spectrometer (SEM-EDS), mercury intrusion porosimetry (MIP), grain-size distribution (GSD) and semi-empirical tests (Atterberg…
Development and In Vitro Evaluation of Lyotropic Liquid Crystals for the Controlled Release of Dexamethasone.
2017
Made available in DSpace on 2018-12-11T17:33:26Z (GMT). No. of bitstreams: 0 Previous issue date: 2017-08-02 Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) In this study, amphiphilic polymers were investigated as biomaterials that can control dexamethasone (DXM) release. Such materials present interfacial properties in the presence of water and an oily phase that can result in lyotropic liquid crystalline systems (LLCS). In addition, they can form colloidal nanostructures similar to those in living organisms, such as bilayers and hexagonal and cubic phases, which can be exploited to solubilize lipophilic drugs to sustain their release and enhance bioavailability. It was…
Holographic Recording of Surface Relief Gratings on As40S60-xSex Thin Films
2015
The studies of direct holographic recording of the surface relief gratings on amorphous As40S60−xSex thin films are presented. These gratings were created upon exposure to polarized laser beams of various wavelengths (λ = 473 – 650 nm). The orthogonally ±45° linearly polarized light beams were used for recording. The surface structure of the relief gratings was investigated by atomic force microscopy. The influence of laser beam wavelength and spatial frequency of the gratings recorded (grating period ?) on the surface relief gratings formation for every composition was examined.
Improved noncontact optical sensor for detection of glucose concentration and indication of dehydration level.
2014
The ability to extract different bio-medical parameters from one single wristwatch device can be very applicable. The wearable device that is presented in this paper is based on two optical approaches. The first is the extraction and separation of remote vibration sources and the second is the rotation of linearly polarized light by certain materials exposed to magnetic fields. The technique is based on tracking of temporal changes of reflected secondary speckles produced in the wrist when being illuminated by a laser beam. Change in skin’s temporal vibration profile together with change in the magnetic medium that is generated by time varied glucose concentration caused these temporal chan…
Ionization of atomic hydrogen with up to four excess photons by circularly and linearly polarized light
2012
The above threshold ionization (ATI) is investigated for H in ns states. The total generalized cross sections are calculated for up to 4 excess photons using perturbation theory and modified Coulomb Green's function Sturmian expansion.
Reduction of focus size in tightly focused linearly polarized beams
2004
The electromagnetic theory predicts that when a linearly polarized collimated field is focused by a high-angle focusing system, components perpendicular to the initial polarization are generated. The use of annular masks to reduce the area of the focal spot usually increases the magnitude of this phenomenon, known as depolarization. We present a class of masks, the three-ring masks, which are important because they narrow the central lobe of the focal intensity distribution without increasing the depolarization. This can be very useful in modern optical applications, such as confocal microscopy or multiphoton scanning microscopy.